Worktop design and quotation in Stepney Green

Yes. Stepney Green is on the patch, and the postcodes we work here are E1. It is run from the Essex side, covering Essex & East London. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Georgian houses put the kitchen in a basement or a rear closet wing, and the stairs down to it are the tightest part of the whole route. The quote separates the joins the run needs from the joins the route forces, because they are different decisions with the same price. You see it before you commit to anything. Old masonry walls bow and the chimney breast is never plumb, so template on the finished plaster and expect deep scribes on both ends of the run.

Several of the older houses are listed or in a conservation area, so scaffolding, hoisting and any external route need agreeing in advance. Front steps up to a raised entrance and a narrow original hallway mean a slab has to come in on edge and turn at the stair foot. A hoisted piece needs a clear drop zone, a lifting plan and someone stationed at street level, none of which gets arranged on the morning. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Send us the run lengths, plus photos taken walking from the pavement through the hall to the kitchen so we can see the door widths and the stair turn. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.