Worktop replacement in Stonebridge

Yes. Stonebridge is on the patch, and the postcodes we work here are NW10. It is worked on our north west London run, along with the rest of Brent. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. It is a full day at the kerb, not a delivery. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Stair carries in walk-up blocks decide the cut list, so template with the turn on the half-landing in mind and split at a sink or hob cut-out where possible.

Estate roads with parking courts and controlled entry, and a lot of the flats are first or second floor with a communal stair rather than a lift, which caps the sensible piece length. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Sound carcasses are the condition.