Worktop templating in Surbiton

Yes. Surbiton is on the patch, and the postcodes we work here are KT6. It is worked on our south west London run, along with the rest of Kingston upon Thames. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. It is noted on the job sheet at template so the fitting crew inherit the answer rather than rediscovering it. Two hours is the realistic figure. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These blocks were built with a lift from new, which will usually take a worktop and almost never takes a full-length island piece. Mansion-block kitchens usually have a serviced riser or boxed pipework somewhere in the run, and the boxing is rarely the same depth from one end to the other, so the template takes the depth at worktop height at several points rather than one reading. Recorded as it is, not as it was drawn. Interwar flats have solid but uneven screed floors and out-of-square walls, so a template beats a drawing every time here.

Wide tree-lined roads with driveways on the semis, but the mansion blocks have communal entrances, half-landings and small lifts, plus resident-only parking courts with no visitor bays. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The template records every angle in that shape as it actually is rather than as the plan drew it. The drawing leaves site complete. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Boxing and riser casings built, cased and finished to their final surface, units fixed and levelled, and building access, lift booking and porter arrangements agreed so both the template visit and the later fit can run. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.