Worktop installation in Tooting Graveney

Yes. Tooting Graveney is on the patch, and the postcodes we work here are SW17. It is worked on our south west London run, along with the rest of Wandsworth. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The back door frequently opens straight into the kitchen, which is the best carry route in the house and the one people forget to mention. Access is usually the easy part here, as most of these have a side gate and a back door straight into the kitchen, so we carry down the side alley rather than through the house and keep the mess outside. That is the shape of the day. Knocking into the rear reception leaves the old external wall thickness as a step in the run, so the worktop needs a stepped back edge rather than a straight scribe.

Parking restrictions are lighter towards the borough boundary and many houses have hardstanding, which makes staging easier than in central Tooting. Side alleys between semis are the usual squeeze at roughly 800mm. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.