Worktop installation in Figges Marsh

Yes. Figges Marsh is on the patch, and the postcodes we work here are CR4. It is worked on our south west London run, along with the rest of Merton. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The structure below is commercial, so the floor is often timber over a shop ceiling and the load path under an island is worth thinking about. The fitting itself is about squaring up to walls that look modern and are not: block or breeze walls with a skim that has been patched over decades, so we still dry-lay and scribe rather than trust the template edge. Walked, measured, protected, then lifted. Steep single-flight stairs to above-shop flats mean anything over 2.4m has to be cut down first, measure the stairwell before deciding where the joint goes.

The London Road frontage is a busy bus corridor with red-route style restrictions in places and no realistic standing, so deliveries go in early. Above-shop flats are entered through a shared street door with a straight steep stair and no turning space at the top. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Unlock any rear or shared path gate and clear both the hall and the back approach so we can choose the better route on the day. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.