Worktop design and quotation in Wembley Park

Yes. Wembley Park is on the patch, and the postcodes we work here are HA9. It is run from the Watford side, covering Hertfordshire & North London. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Kitchens are compact and standardised, which makes the fixed template, fabrication and fitting lines a larger share of the total than the stone. The fixed lines do not shrink with the room, so on a small kitchen they are a larger share of the total than the stone. Priced from the building, not from a rate card. Plan for narrow-format pieces here: the constraint is the lift and the flat door, not the kitchen, and a joint in the right place saves an aborted delivery.

Almost everything is above ground floor, so it is a booked service lift, a loading bay with a time limit, and a concierge who wants insurance paperwork before the slab leaves the van. Lift car depth decides whether a slab travels flat or on edge, and that measurement should be taken at survey, not on fitting day. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Nothing payable until template.