Worktop installation in West Drayton

Yes. West Drayton is on the patch, and the postcodes we work here are UB7. It is worked on our west London run, along with the rest of Hillingdon. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The classic arrangement is the original back room with a later extension bolted onto it, so the kitchen is two ages of building in one room. The fitting itself is slower than the carry: original plaster on the party wall and around the old chimney breast is rarely square to the run, so back scribes get cut on site, and where a return wraps into a breast recess we template that shoulder tight and ease it in. That is the shape of the day. New-build flats here come with thin compact laminate already fitted, so the upgrade usually means a new sink and tap as well as new tops.

The station area is clogged with commuter parking and the level crossing. The village streets have drives, but the new developments are built on narrow shared surfaces with limited waiting. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.