Worktop fabrication in West Kensington

Yes. West Kensington is on the patch, and the postcodes we work here are W14. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. Ceilings are high and external walls are thick, so the run under the window sits in a deep reveal and the back edge has to be templated to the reveal rather than assumed square. Settled on the drawing, cut once. The internal corridor turn beats the front door every time in these blocks - template the corridor, then design the joints.

Mansion blocks here mostly have no lift or a small original one, communal stone stairs with iron balustrades, and a caretaker rather than a full-time porter, so access is arranged flat by flat. North End Road has a street market on trading days that removes kerbside access entirely, so pick a non-market day for delivery if you can. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. So the nesting is worked to the measured route first and to the slab second. The drawing carries that decision through to the saw.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Proven on the bench before dispatch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. So the nesting is planned around it rather than around a standard kitchen. Nested for the job in front of us.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. The bench proves it before the van does. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. The drawing decides it, not the fitter. Access arrangements and the porter's permitted hours need confirming before we cut, because the agreed piece size is what the nesting is built around. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Sink and hob are dry-fitted on the bench before dispatch, whoever supplied them. Dry-assembled before it leaves.