Kitchen worktops in West Norwood

Yes. Steep terraced streets where houses are often split into flats, so the kitchen is a rear room of about 2.4m by 3.5m with a run and a return and no space for an island. Whole houses take a shallow rear extension because gardens rise steeply away from the building. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised.

Victorian terrace, Victorian villa, 1960s estate block and Interwar semi. A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. Alcoves either side of the breast are rarely the same width and rarely parallel, so each one is templated as its own piece with its own scribe. Recorded as it is, not as it was drawn.

The gradient means many properties have flights of external steps up from the pavement to a raised front door, which is the main handling problem here. Parking is a mix of controlled and uncontrolled by street, and the South Circular limits east-west movement at peak. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

Worktop replacement, worktop templating and worktop installation, in that order. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn. External steps up to raised entrances are the recurring issue, count them and check the tread depth before quoting, because a six-step approach changes the labour on every piece.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.