Kitchen worktops in Yeading

Yes. Estate housing with small square kitchens on a two-wall layout, and the boiler and meter cupboards eating into what looks on paper like a usable run. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. The load plan follows from it.

Postwar estate house, 1960s maisonette and 1970s low-rise block. Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Deck access or a single narrow staircase with tight half-landings means long pieces get walked up on edge, and the landing turn is checked before we commit. That is the shape of the day.

Estate cul-de-sacs with parking courts, bollarded footpaths and very little turning space, and some blocks are walk-up only. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Worktop replacement, worktop installation and worktop fabrication, in that order. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. Meter and boiler cupboards break the run into 1.2m and 900mm pieces, so there are far more joints than the square metre figure suggests.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.