Worktop fabrication in Belgravia

Yes. Belgravia is on the patch, and the postcodes we work here are SW1W, SW1X. It is worked on our central London run, along with the rest of Westminster. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Georgian houses put the kitchen in a basement or a rear closet wing, and the stairs down to it are the tightest part of the whole route. The other constraint is the hall: a piece has to come through the front door, round the newel at the foot of the stairs and through a doorway into the back kitchen, so we size the pieces to the tightest turn on that route before we nest anything, which sometimes means splitting a run that would otherwise have gone in whole. The bench proves it before the van moves. Basement kitchens here run long and thin, so the slab has to be brought in on edge down a stair with limited headroom - measure the stair soffit, that is what limits piece length, not the room.

Listed status and estate landlord consent govern everything, works hours are policed by the managing agent and neighbours, skips are effectively banned so waste goes out by hand, and slabs come down an external area stair or through the front door and down a stone flight with a tight turn at the bottom. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. So the nesting is worked to the measured route first and to the slab second. It is settled on the bench, not on site.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Nested for the job in front of us.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. Every join sits over a gable. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. Machined to the real line. The sink and hob need to be on site and the run layout fixed before we start cutting, because moving a hob after the join position is set means recutting the whole piece. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction.