Worktop replacement in Belgravia

Yes. Belgravia is on the patch, and the postcodes we work here are SW1W, SW1X. It is worked on our central London run, along with the rest of Westminster. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rooms are tall with deep window reveals, and a run finishing into a reveal is templated to it rather than assumed square. Lath-and-plaster and bowed brickwork mean we template for scribes rather than straight cuts, and each piece is offered up and eased in rather than dropped straight down. Sound carcasses are the one condition. Basement kitchens here run long and thin, so the slab has to be brought in on edge down a stair with limited headroom - measure the stair soffit, that is what limits piece length, not the room.

Listed status and estate landlord consent govern everything, works hours are policed by the managing agent and neighbours, skips are effectively banned so waste goes out by hand, and slabs come down an external area stair or through the front door and down a stone flight with a tight turn at the bottom. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.