Worktop replacement in Victoria

Yes. Victoria is on the patch, and the postcodes we work here are SW1E, SW1P. It is worked on our central London run, along with the rest of Westminster. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These kitchens are full of boxed soil stacks, gas risers and heating pipework, and the boxing usually stops short of the ceiling. A full stone piece is several times the weight of the laminate coming out, and there is rarely room to turn it on a half-landing. Units kept, surface changed, one day. Recirculating extraction means the hob often sits under a wall unit rather than an external wall - confirm the hob cut-out clearances to the units above, they are tighter than a standard layout.

Victoria Street and Vauxhall Bridge Road are red routes with no loading in the day, so deliveries are early morning into a booked bay. New buildings have a service yard with a height barrier and a dedicated goods lift that has to be reserved days ahead. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Get the managing agent's or freeholder's approval and the permitted hours confirmed beforehand, and agree with the porter who protects the communal carpet, stonework and lift. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Sound carcasses are the condition.