Worktop replacement in Mayfair

Yes. Mayfair is on the patch, and the postcodes we work here are W1J, W1K, W1S. It is worked on our central London run, along with the rest of Westminster. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Marble here is specified by the designer and it stains - get the client to sign off on sealing and expected patina before you fabricate, because the complaint always comes later.

Estate freeholders impose alteration consents and works hours, the buildings are listed so nothing gets fixed to original fabric without approval, and the lifts in period blocks are small original cars that will not take a slab. Deliveries are frequently routed through the mews at the back on a permit. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Have a fitter or joiner fix and level the island units beforehand, and get the sink, taps, hob and any range on site before templating so we cut to the actual appliances. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.