Worktop installation in Berrylands

Yes. Berrylands is on the patch, and the postcodes we work here are KT5. It is worked on our south west London run, along with the rest of Kingston upon Thames. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The kitchen sits at the rear with a back door beside it, so the carry is short and comes in from the garden rather than through the house. The carry is the easy part; the plaster around the old breast and the packing over a moved floor are not. That is the shape of the day. Because the houses repeat, so do the mistakes - the original kitchen window sits low, so upstands regularly clash with the sill and need cutting down.

Quiet residential roads, off-street driveways at nearly every house, and dropped kerbs that let the van get within a few metres of the front door - about as easy as access gets in the borough. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop splashbacks & upstands. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional.

Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.