Worktop replacement in Bow Common

Yes. Bow Common is on the patch, and the postcodes we work here are E3, E14. It is worked on our east London run, along with the rest of Tower Hamlets. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Access is a question about the plot rather than the house: a narrow frontage between older buildings with nowhere obvious to stand a van. Housings set out for a 38mm laminate change clearance when you drop to 20mm or 30mm stone, and that is checked before cutting. Units kept, surface changed, one day. Boilers and gas meters are frequently mounted in the run, so cut-outs and clearances need agreeing on site before anything is fabricated.

Wide estate roads and open parking courts make the physical unload easy, but bollards and locked gates between courts mean the shortest route on a map often is not open. The 1980s infill houses have a straight run from front door to kitchen, which is a rare thing round here. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.