Worktop replacement in Bruce Grove

Yes. Bruce Grove is on the patch, and the postcodes we work here are N17. It is worked on our north London run, along with the rest of Haringey. A controlled parking zone means either a visitor permit sorted in advance or a suspended bay, and a suspension is applied for days ahead rather than on the morning. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Lease conditions and the other flats in the building decide when noisy work can happen, so the fitting day has a start and a finish that are not ours to set. What the old top has been hiding is usually a floor that settled towards the back and units that were never fixed back to the wall. What is under the old top is the real question. Because these are conversions, the kitchen is often above someone else's living room - drop cloths and a no-cutting-inside rule are worth agreeing with the freeholder up front.

The High Road end has heavy bus traffic, market activity and loading restrictions, and the side streets are permit-controlled. Converted houses have a communal front door, a shared hall with buggies and bikes in it, and a stair with a tight quarter-turn. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. That is agreed before a plumber is booked.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The carcasses have to be sound, because stone is several times the weight of what is coming off. Sound carcasses or it does not go ahead. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.