Kitchen worktops in Chiswick

Yes. Most of the work is retrofit into side-return or full-width rear extensions, so the kitchen is a long single-wall galley of 4m to 5m facing an island of 2.8m to 3.4m. Above the shops and in the period conversions you get the opposite problem: a 2.2m galley with the boiler still on the wall. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is.

Victorian terrace, Edwardian villa, 1930s mansion block and 2010s riverside apartment. The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. The kitchen is usually a long galley in a rear extension or side return, so the run lengths are the first thing we check against slab length, anything beyond roughly three metres either needs a join or a second slab, and that decision alone moves the material figure more than a few extra square metres would. Priced from the building, not from a rate card.

Controlled parking on effectively every street, no driveways on the terraces, and the final approach is 20mph residential roads off the A4 or A316 with school-run congestion morning and afternoon. Loading needs a suspension or an early slot. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate.

Worktop installation, worktop templating and worktop design & quotation, in that order. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Nearly every job here has an island longer than a standard slab, so where the joint lands gets argued out at template rather than left to the workshop.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.