Worktop installation in Chiswick

Yes. Chiswick is on the patch, and the postcodes we work here are W4. It is worked on our west London run, along with the rest of Hounslow. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A long piece has to come through the front door, down the hall, round the newel post and through a doorway with a step down into the addition. The day is planned backwards from the hall, and the scribing takes longer than the carry. That is the shape of the day. Nearly every job here has an island longer than a standard slab, so where the joint lands gets argued out at template rather than left to the workshop.

Controlled parking on effectively every street, no driveways on the terraces, and the final approach is 20mph residential roads off the A4 or A316 with school-run congestion morning and afternoon. Loading needs a suspension or an early slot. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop design & quotation. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.