Worktop replacement in Coney Hall

Yes. Coney Hall is on the patch, and the postcodes we work here are BR4. It is worked on our south east London run, along with the rest of Bromley. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

An ex-council house is solidly built to a standard plan, with the kitchen at the rear and a back door next to it. Ex-council flats and maisonettes are built in dense concrete and blockwork, so anything that has to be fixed back, such as brackets under a peninsula or support for an end panel, goes in with proper anchors and an SDS rather than plasterboard fixings. Sound carcasses are the one condition. Taking out the rear lobby leaves a patched floor and a new opening, so we insist the plaster and floor are finished before templating or the run comes out 8mm shy.

Estate roads with parking on both sides and narrow front drives that only take one car, so the van often sits on the road and a slab goes over the front garden path. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The carcasses have to be sound, because stone is several times the weight of what is coming off. A plumber either side of us. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.