Worktop installation in Coney Hall

Yes. Coney Hall is on the patch, and the postcodes we work here are BR4. It is worked on our south east London run, along with the rest of Bromley. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Deck access or a single narrow staircase with tight half-landings means long pieces get walked up on edge, and the landing turn is checked before we commit. Walked, measured, protected, then lifted. Taking out the rear lobby leaves a patched floor and a new opening, so we insist the plaster and floor are finished before templating or the run comes out 8mm shy.

Estate roads with parking on both sides and narrow front drives that only take one car, so the van often sits on the road and a slab goes over the front garden path. A short hard approach with no steps means a full-length piece can be walked in flat by two people rather than turned up on edge. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.