Worktop installation in Cranford

Yes. Cranford is on the patch, and the postcodes we work here are TW5, TW4. It is worked on our west London run, along with the rest of Hounslow. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The classic arrangement is the original back room with a later extension bolted onto it, so the kitchen is two ages of building in one room. The carry is the easy part; the plaster around the old breast and the packing over a moved floor are not. Walked, measured, protected, then lifted. Houses directly under the flight path have secondary glazing and unusually deep reveals, so stone window sill returns get asked for far more often here than elsewhere.

Straight off the A4 Bath Road, though the hotel strip and the M4 spur gridlock at airport shift changes. Drives are common on the residential streets. A short hard approach with no steps means a full-length piece can be walked in flat by two people rather than turned up on edge. We walk the route with a tape and protect it end to end before the first piece is lifted. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.