Worktop replacement in East Village

Yes. East Village is on the patch, and the postcodes we work here are E20. It is worked on our east London run, along with the rest of Newham. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. It is a full day at the kerb, not a delivery. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The room is genuinely square and the units are plumb, so the visit is more about the building than about the kitchen. The work is all in the building, not the kitchen. Units kept, surface changed, one day. Because the kitchens are identical across blocks, the layouts repeat, but the estate access rules mean the booking has to be made before the template is even scheduled.

The estate is car-free in the residential courtyards with a private management company controlling access, so vehicles use designated service bays and the last stretch is a trolley run across podium paving. Deliveries and lift use must be booked with the estate management team, usually with a fixed window and a lift protection requirement. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. This is the commonest reason a replacement turns out to need more than a straight swap. Found at template, not on fit day. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Plumber either side of us.