Worktop installation in East Wickham

Yes. East Wickham is on the patch, and the postcodes we work here are DA16. It is worked on our south east London run, along with the rest of Bexley. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. The stairwell half-landing is usually the tightest point on the whole route and it dictates the maximum piece. That is the shape of the day. Postwar units here are often 500mm deep rather than 600mm, so check before ordering standard-width worktop.

Quiet residential grid with front gardens, drives on the private housing and parking courts on the estate sections; vehicle access is easy throughout. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.