Worktop installation in Welling

Yes. Welling is on the patch, and the postcodes we work here are DA16. It is worked on our south east London run, along with the rest of Bexley. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These kitchens have been retiled at least twice, and stripping the tiles takes the bottom band of plaster with them because the old laminate ran underneath rather than up to them. The fitting itself is slower than the carry: original plaster on the party wall and around the old chimney breast is rarely square to the run, so back scribes get cut on site, and where a return wraps into a breast recess we template that shoulder tight and ease it in. That is the shape of the day. The 1930s side door into the alley usually lands mid-run, either it gets blocked up or the worktop stops short of it.

The main roads are bus-heavy with waiting restrictions, but the residential streets behind have drives and space; flats above the shopping parades are stair-only. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.