Worktop installation in Erith

Yes. Erith is on the patch, and the postcodes we work here are DA8. It is worked on our south east London run, along with the rest of Bexley. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Concrete panel walls bow noticeably over the length of a run, so the template picks up the real line and the back edge is cut to follow it. The stairwell half-landing is usually the tightest point on the whole route and it dictates the maximum piece. That is the shape of the day. Lift dimensions in the older towers are the hard limit here, most runs go in as two or three jointed pieces.

Tower blocks with small passenger lifts and long internal corridors, riverside blocks with a loading bay, and a steep climb up from the riverside that makes any carry harder than it looks on a map. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. Rushing that is what leaves a gap you look at every morning for fifteen years. It is the slow part of the day and it should be. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.