Worktop design and quotation in Frognal

Yes. Frognal is on the patch, and the postcodes we work here are NW3. It is worked on our central and north London run, along with the rest of Camden. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The original kitchen was a small service room, so what is there now is a knock-through and the junction between the two floors is rarely level. If the diagonal of the car will not take a full-length piece, the worktop gets designed around the lift rather than around the room, which means extra joins, worse nesting on the slab and sometimes a second slab bought to produce the same kitchen in more pieces. That is what the itemised lines are for. Full-height splashbacks and island returns mean batch-matching matters more here than access does, so reserve slabs from one block and lay them out before cutting.

Wide but steep roads with in-and-out drives, so vehicle access to the door is usually good and the constraint is the long gravel drive and the steps up to the entrance rather than the parking. A few houses have gated entrances too narrow for a long-wheelbase van. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. You see that figure before we template, not after.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop fabrication and worktop installation. Small kitchens in a shared house are all short runs and tight cut-out spacing, which is more bench work per square metre than one large kitchen would be. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Batching several kitchens together is the one situation where buying a whole slab is cheaper per kitchen rather than more expensive. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. Send photographs of every corner of the room and it gets priced properly first time. Priced as fabrication, not as area. Measure the internal lift car, width, depth and height, and photograph the stair turn and landing doors, then send those with the run lengths. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Nothing payable until template.