Worktop installation in Gallions Reach

Yes. Gallions Reach is on the patch, and the postcodes we work here are E6, E16. It is worked on our east London run, along with the rest of Newham. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Houses on modern estates are built to a handful of standard plans, so the kitchen is square, predictable and modest in area. Everything comes up in the lift, so we measure the lift car's internal diagonal before the piece is loaded, because a car that takes 2.4m on the diagonal will not take a 3m worktop no matter how you stand it. Walked, measured, protected, then lifted. Modern square rooms make this the closest thing to a drawing-office job in the borough, though the island's overhang still needs proper brackets, not just adhesive.

Wide modern roads, retail park loading and driveways on most houses mean a full-size van can park at the door with no permit issues. Newer blocks have modern lifts of a usable size, but gated parking courts need a resident to let the van in. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop design & quotation. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.