Worktop installation in Ickenham

Yes. Ickenham is on the patch, and the postcodes we work here are UB10. It is worked on our west London run, along with the rest of Hillingdon. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The kitchen is usually a rear room extended into the garden, with the original external wall now standing inside the run. The carry is the easy part; the plaster around the old breast and the packing over a moved floor are not. That is the shape of the day. Range cookers dictate the aperture, so measure the appliance itself and hold a 3mm gap each side rather than trusting the manufacturer's spec sheet.

The village core around the pond is conservation-controlled and narrow, but the surrounding estates have wide drives with room to turn. Low bridges on the Metropolitan line approach catch out taller vehicles. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. Rushing that is what leaves a gap you look at every morning for fifteen years. It is the slow part of the day and it should be. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.