Worktop replacement in Loxford

Yes. Loxford is on the patch, and the postcodes we work here are IG1. It is worked on our east London run, along with the rest of Redbridge. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A bay-fronted terrace has a long hall running past the stairs to the kitchen, so the hall turn caps the piece length before the run length does. What the old top has been hiding is usually a floor that settled towards the back and units that were never fixed back to the wall. What is under the old top is the real question. Nine times out of ten the units are old and out of level here, so we scribe hard to the wall and expect to pack the run rather than trust the existing tops as a guide.

Narrow terraced streets with rear service alleys, heavy on-street parking pressure and very little off-street space, so slabs generally come off the van at the kerb and go through the front door and down the hall. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. We would rather find it at template than on the morning, which is why the templater looks behind the units. Found at template, not on fit day. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition.