Worktop templating in Moorgate

Yes. Moorgate is on the patch, and the postcodes we work here are EC2M, EC2Y. It is worked on our the City run, along with the rest of the Square Mile. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The structure is a concrete or steel frame, so what looks like a wall is often a partition and what looks like a partition is often a column. The room is square and the plasterboard is not, so the internal corner is recorded as it is rather than as ninety degrees. Recorded as it is, not as it was drawn. Windowless interiors are lit by spots and LED strip, which is unforgiving on a bad joint - dry-fit the joint and check it under the client's own lighting before it is glued.

Moorgate and London Wall are busy multi-lane routes with no stopping, so deliveries go into building basements with height barriers, or onto short side-street windows early in the day. Ongoing construction across this fringe means hoardings and lane closures change frequently, so confirm the approach the morning of the fit. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. The template records it along with everything else.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop replacement. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Two to three hours on site, with the sink, tap and hob physically present. The room as it is, not as it was drawn.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. Join positions and vein direction are marked on the template drawing before it leaves site. The drawing leaves site complete. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Boards taped or skimmed and finished, units fixed back to the wall and levelled off, and the appliances on site - the wall must be at its final thickness on template day, so no tiler or splashback fitter gets ahead of the worktop. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. No stone is cut from a plan.