Worktop fabrication in Nine Elms

Yes. Nine Elms is on the patch, and the postcodes we work here are SW8, SW11. It is worked on our south west London run, along with the rest of Wandsworth. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. The kitchen is open plan and the island is often long enough to need a join, and it sits in the middle of the room where every edge is visible, so the join goes over a gable and usually under the hob line where the eye does not follow it. Every join over a gable, clear of every cut-out. Get the goods lift internal dimensions in writing before cutting, because a 2.8m piece that will not stand up in the lift car has to be re-cut at the workshop, not on the loading bay.

Every building is managed, loading bay booking, a service lift with a stated internal length, dock time limits and a site induction before anyone goes up. The lift diagonal, not the door, is what limits slab size. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. So the nesting is worked to the measured route first and to the slab second. It is settled on the bench, not on site.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. So the nesting is planned around it rather than around a standard kitchen. Same slab run, or it is not a match. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Pieces are dry-assembled and checked on the bench before anything is loaded. Proven on the bench before dispatch.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Pieces are dry-assembled on the bench before dispatch so the corners are known to close before they leave the workshop. Every join sits over a gable. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

An intruding steel column, a brick pier or a downstand breaks a run that would otherwise have been one clean piece. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. Radiused, polished, and clear of the joins. The island layout, including whether the ends are mitred down to the floor, needs settling before cutting, since mitred ends are cut in sequence with the top and dry-assembled as one unit. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. Sink and hob are dry-fitted on the bench before dispatch, whoever supplied them. Dry-assembled before it leaves.