Skip to content

City of Westminster · SW1V

Worktop installation in Pimlico

Fitting day: protected route, back edges scribed to the real wall line, joins pulled flush, sink and hob sealed.

  • 5.0from 23 Google reviews
  • 25-year material · 5-year workmanship
  • Fitted 3-7 working days from template

Pimlico kitchens

What the kitchens here are actually like

Cubitt stucco terrace conversion1950s Churchill Gardens block1970s Lillington Gardens brick estate

Nothing in a house of this age is square, and the kitchen is usually the part that has been altered most often. Protection down, dry-lay, scribe, then bond: the order matters more in a difficult room than an easy one. Sink and hob seated and sealed before we go.

Conversion flats in the stucco terraces have small kitchens carved out of grand rooms, typically a 2.4m galley with high ceilings and a cornice cut short. The post-war estate flats have purpose-built kitchens of about 2.5m by 2m with a fitted larder - workable, but there is no island going in either.

Street parking is permit and pay-by-phone with a lot of resident pressure, and the wider stucco streets have suspended bays for other trades most weeks.

Lease conditions and the other flats in the building decide when noisy work can happen, so the fitting day has a start and a finish that are not ours to set. The day is planned backwards from the hall. That is the shape of the day.

What we are usually templating in is Cubitt stucco terrace conversion, 1950s Churchill Gardens block and 1970s Lillington Gardens brick estate. Each of those behaves differently once the old top comes off.

True everywhere

Worktop installation, in short

  • One visit. A straightforward run is a morning; an island and splashbacks take most of the day.
  • Every piece is carried in by hand, and stone does not bend.
  • We seat and seal the sink and hob. We do not connect water, waste, gas or electrics.
  • Floors and units are protected before anything comes through the door.

Covered on our central London run. Fitted 3–7 working days from template.

Victorian and Edwardian terraces

Getting stone into the room

Estate blocks are the constraint - low-rise sections with no lift at all, walkway access, and communal doors that must not be wedged.

Victorian and Edwardian terraces

What gets asked for here

It is on the shortlist for this patch rather than at the top of it, because worktop replacement comes up more often. Nothing about the process differs between the two.

Victorian and Edwardian terraces

The building, and what it does to the job

Post-war estate kitchens use non-standard cabinet depths and out-of-square corners from the original concrete frame - template every corner, do not assume 90 degrees.

Victorian and Edwardian terraces

The shape of the run

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always.

Access

Getting stone into a Pimlico kitchen

Estate blocks are the constraint - low-rise sections with no lift at all, walkway access, and communal doors that must not be wedged. Street parking is permit and pay-by-phone with a lot of resident pressure, and the wider stucco streets have suspended bays for other trades most weeks.

Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.

3–7 working days

From template to fitted, working days from template. The same on this patch as every other.

central London patch

Pimlico is covered on our central London run, along with the rest of Westminster.

We come to you

Templated in your kitchen, cut in our workshop, fitted by our own installers.

Access told straight

If the route forces an extra join, you hear that at quote stage, not on the day.

Questions

Worktop installation in Pimlico

If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.

Do you cover Pimlico?

Yes. Pimlico is on the patch, and the postcodes we work here are SW1V. It is worked on our central London run, along with the rest of Westminster. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Does the housing in Pimlico change how worktop installation works?

A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. The day is planned backwards from the hall. That is the shape of the day. Post-war estate kitchens use non-standard cabinet depths and out-of-square corners from the original concrete frame - template every corner, do not assume 90 degrees.

How does the stone actually reach a kitchen in Pimlico?

Estate blocks are the constraint - low-rise sections with no lift at all, walkway access, and communal doors that must not be wedged. Street parking is permit and pay-by-phone with a lot of resident pressure, and the wider stucco streets have suspended bays for other trades most weeks. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Is worktop installation common in Pimlico?

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Why do two Pimlico kitchens the same size price differently?

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

What has to be finished before you can template?

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. Rushing that is what leaves a gap you look at every morning for fifteen years. It is the slow part of the day and it should be. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.

Next step

Worktop installation in Pimlico, priced properly

Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.

25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.

+44 7830 847489