Worktop replacement in Raynes Park

Yes. Raynes Park is on the patch, and the postcodes we work here are SW20. It is worked on our south west London run, along with the rest of Merton. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

There is usually a shared rear alley, and whether the gate onto it is unlocked decides whether long pieces come in from the back. The junction between the old floor and the extension floor is where a run crossing it needs packing before stone goes on. Units kept, surface changed, one day. 1930s houses almost always have a chimney breast or a flue in the corner of the old kitchen, so the return leg needs a notched back edge rather than a straight cut.

Most houses have a drive or hardstanding, which makes staging easy, but the railway bridge and the level crossings on the Kingston side determine which way a long van can approach. Side gates are usually just over 800mm, so a slab travels edge-on down the flank. Rear access usually lets us fit longer pieces whole, so the join count ends up decided by the slab rather than by the building. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. The strip-out is planned around it.

It is one of the three we do most here, behind worktop installation. Same template visit, same workshop, same installers either way. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The carcasses have to be sound, because stone is several times the weight of what is coming off. A plumber either side of us. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a breast interrupts a long wall the join can often go there, so it reads as a natural break rather than a line in the middle of a worktop. This is the commonest reason a replacement turns out to need more than a straight swap. Found at template, not on fit day. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition.