Worktop installation in Sloane Square

Yes. Sloane Square is on the patch, and the postcodes we work here are SW1W, SW3. It is worked on our west London run, along with the rest of Kensington and Chelsea. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Wider halls make the carry noticeably easier, and that alone can remove a join that a narrower terrace would have forced into the run. The day is planned backwards from the hall, and the scribing takes longer than the carry. Walked, measured, protected, then lifted. Landlord consent and the lease decide what you are allowed to change, so confirm it is a straight replacement before templating anything that moves a service.

Porters, sign-in books, lift protection and a works-hours window that typically runs weekday daytime only, with no weekend working permitted under the lease. Sloane Street and the square itself have short loading windows and heavy enforcement, so unloading is normally into the block's side or rear service door on a timed slot. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.