Worktop installation in Knightsbridge

Yes. Knightsbridge is on the patch, and the postcodes we work here are SW1X. It is worked on our central London run, along with the rest of Westminster. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The lift is a small passenger car with a gate, and the alternative is a stone stair winding round the shaft with a turn at every half-landing. The porter has to be booked, the goods lift protected with the block's own blankets or our own boards, and communal carpet and stair runners covered from the entrance to the flat door before a single piece moves. The slow parts are slow for a reason. Nothing gets cut on site in these buildings, so the template must be dimensionally exact including appliance clearances - one wrong cut-out means a full replacement slab, not a rework.

Buildings run 24-hour security and a strict delivery protocol - vehicle booked in, ID for every fitter, protection down through the lobby and lift, and noisy works restricted to a defined window. Some buildings insist all cutting happens off site with zero exceptions. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. The fitting day is planned backwards from that point, before anything comes off the van. None of it is worked out on the doorstep.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.