Worktop replacement in South Bermondsey

Yes. South Bermondsey is on the patch, and the postcodes we work here are SE16. It is worked on our south east London run, along with the rest of Southwark. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These are built in dense concrete, so support for a peninsula or an end panel goes in with proper anchors rather than plugs. The plaster is bonded straight onto the concrete, so the bottom course of tiles tends to bring plaster with it when the old top comes off, leaving a rough band behind the upstand. What is under the old top is the real question. Assume the carry, not the drive - if the lift is down, a 3m piece is not going up a deck-access stair, so it gets cut to two.

Balcony-access blocks and deck walkways mean a long carry from the parking court, and lifts in the older blocks are small and frequently out of service; match days around the stadium close roads and fill every kerb. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop splashbacks & upstands. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.