Worktop design and quotation in South Hampstead

Yes. South Hampstead is on the patch, and the postcodes we work here are NW6, NW3. It is run from the Watford side, covering Hertfordshire & North London. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These kitchens are big rooms with long perimeter runs and an island, so level has to hold across the whole floor rather than along one wall. An island a few hundred millimetres over the usable slab length costs a whole second slab, which is worth knowing before the layout is fixed. Priced from the building, not from a rate card. Winder stairs are worse than narrow ones for slab work because the effective diagonal shrinks at the turn, so size pieces off the tightest tread rather than the landing.

Permit bays fill early and many villas sit back behind long front paths, so the carry is 15-25 metres before you even reach the door. No lifts in the conversions, and the original staircases are generous in width but have winders at the turn. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send the island size including the overhang and which side people sit at, the stool count, and confirm the edge profile you want and which edges are to receive it. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Nothing payable until template.