Kitchen worktops in Stanmore

Yes. The largest houses in the borough, where kitchens are designed rooms with a 3m or larger island, a second prep sink, integrated coffee and wine units, and a separate utility and pantry that each carry their own stone. Kosher and multi-kitchen arrangements are not unusual, meaning two hobs, two sinks and duplicated runs to keep meat and dairy preparation separate. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest.

1930s detached, large post-war detached, period houses on Stanmore Hill and gated modern development. The kitchen is usually a rear room extended into the garden, with the original external wall now standing inside the run. Walls between the original room and the extension are frequently out of square, which affects the template but not the price; what does affect it is the appliance list, because a drop-in range, an undermount bowl and a half, a boiling tap and a separate drainer are four separately priced cut-outs. That is what the itemised lines are for.

Long gravel or block-paved driveways with gates and often a turning circle, so vehicles get very close, but the internal carry from the front door to the rear kitchen can be 15m or more with a hallway turn. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Worktop design & quotation, worktop fabrication and worktop installation, in that order. Batching several kitchens together is the one situation where buying a whole slab is cheaper per kitchen rather than more expensive. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Separate meat and dairy runs mean planning two identical worktops from the same batch so the colour matches across the room, and that is a slab reservation decision, not a fitting decision.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Where a breast interrupts a long wall the join can often go there, so it reads as a natural break rather than a line in the middle of a worktop. Rushing that is what leaves a gap you look at every morning for fifteen years. Eased in, never forced. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.