Kitchen worktops in Strand

Yes. Barely any family housing - the stone work here is tea points, staff kitchens and small serviced apartment kitchenettes in office and hotel buildings. Standard job is a 2m to 3m counter with an undermount bowl, a boiling tap cut-out and a matching upstand, repeated across several floors. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. It is decided in the yard, not at the kerb.

Victorian commercial block, Edwardian chambers and hotel and office building. Half-landings mean the back of the house sits at a slightly different level from the front, and a knocked-through kitchen crosses that line. The galley run down a side-return usually measures longer than a slab will give us, so a join is designed in from the start and nested to land over a cabinet gable rather than wherever the material happens to run out. The bench proves it before the van moves.

Red route with no stopping along the Strand itself and constant event and works closures around Aldwych and Trafalgar Square. Access is via a basement loading bay with a height restriction, a booked goods lift, and building security requiring method statements in advance. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. It is settled on the bench, not on site.

Worktop fabrication, worktop installation and worktop templating, in that order. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Repeat tea points across floors look identical on the drawing but never are - template each floor separately, the risers and boxings move.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.