Worktop replacement in Tower Hill

Yes. Tower Hill is on the patch, and the postcodes we work here are EC3N. It is worked on our the City run, along with the rest of the Square Mile. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Service risers from the original building run through the flats. They are boxed, they stay, and they have to remain accessible. Housings set out for a 38mm laminate change clearance when you drop to 20mm or 30mm stone, and that is checked before cutting. What is under the old top is the real question. Nothing in the Georgian stock is square or level, so template with a digital arm and expect to scribe every back edge rather than cutting to a drawing.

Tourist footfall around the Tower is constant and the surrounding roads carry heavy through traffic with no stopping, so loading has to be on the back streets in an off-peak window. Georgian properties have narrow original doors and steep straight stairs with a tight half-landing, and the listing means no removal of joinery to get a piece through. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. The strip-out is planned around it.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.