Worktop replacement in Monument

Yes. Monument is on the patch, and the postcodes we work here are EC3R. It is worked on our the City run, along with the rest of the Square Mile. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. The lift car is usually too short and too low to take a full-length piece flat or on edge, so stone either goes up the communal stairs with their half-landings and winders, or the run is designed with joins that suit the staircase rather than the kitchen. Sound carcasses are the one condition. The gradient on the lanes down to the river means a loaded trolley will run away from you - chock it or carry it, do not push it downhill.

The lanes running down toward the river between Eastcheap and Lower Thames Street are narrow, one-way and steeply graded in places, and several are pedestrian-only during the working day. Building entrances are often a single street door with a straight stair to the upper floors, no lift, and no room at all to set a slab down while you rest. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop splashbacks & upstands and worktop templating. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Get the managing agent's or freeholder's approval and the permitted hours confirmed beforehand, and agree with the porter who protects the communal carpet, stonework and lift. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.