Kitchen worktops in Wallington

Yes. Tree-lined roads near the station with substantial Edwardian and inter-war houses, so kitchens are often in a rear return that gets widened, giving a long run plus a peninsula or a compact island. A fair number of the Edwardian villas have been split into flats with kitchens fitted into former bedrooms. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised.

Edwardian villa, 1930s semi, 1930s detached and 1960s flats. Original walls are thick, lime-plastered and rarely straight, which makes dry-laying and scribing the bulk of the fitting day. These are the multi-piece jobs: long runs, a large island and often a range cooker that cannot be moved, so the stone is templated in several pieces and how the vein runs across the joins matters. What is under the old top is the real question.

Mature street trees with low branches make van positioning awkward on some roads, and the villas sit behind long front paths with a tiled step up to a recessed porch. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Worktop templating, worktop installation and worktop replacement, in that order. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn. Recessed Edwardian porches are narrower than the front door opening, so the real constraint is the porch, and we measure that rather than the door frame.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.