Kitchen worktops in Carshalton Beeches

Yes. Wide plots laid out as a garden-suburb style estate, so kitchens are generously sized even before extending, and most projects add a full island plus a utility. Larder cupboards and rear porches from the original build usually get absorbed into the new layout. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

1920s detached, 1930s detached, large inter-war semi and post-war infill. The chimney breast in the corner has usually been left in place, so the run gains a return and two scribed ends. What does drive the bench work is the knocked-through kitchen-diner: the return worktop and any peninsula are seen end-on from the dining side, so we nest the pieces so the veining carries across the internal corner in the same direction rather than turning through ninety degrees. The bench proves it before the van moves.

Very good. Wide tree-lined roads, deep front drives with room to turn, and side access down the flank of most detached houses straight to the rear. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. The drawing carries that decision through to the saw.

Worktop design & quotation, worktop fabrication and worktop installation, in that order. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Being able to get straight round the side means single lengths over 3m are actually deliverable here, so the design should take advantage rather than defaulting to a joint.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. The bench proves it before the van does. Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Priced as fabrication, not as area. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.