Worktop installation in Wimbledon Park

Yes. Wimbledon Park is on the patch, and the postcodes we work here are SW19. It is worked on our south west London run, along with the rest of Merton. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. Walked, measured, protected, then lifted. Extension floors here are often laid before the units go in and settle unevenly, so the base cabinets need packing and re-levelling on template day or the joint on a long run opens up.

Permit-holder bays fill up from mid-morning and the streets are narrow enough that a parked van blocks a lane. Upper conversion flats are reached by a straight but tight internal stair with a half-landing turn, so long lengths have to be measured against the stairwell diagonal before ordering. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. Rushing that is what leaves a gap you look at every morning for fifteen years. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Access for the whole slot, or a different day.