Edges & finishes
Corners
Corners are where worktops get knocked, and where hips meet stone at speed.
Before you choose
These are options, not products
You cannot add an edge profile to a basket, and we would not want you to. What each of these costs depends on how many metres of it your kitchen needs, and on the slab it is being cut from.
So there are no prices on this page. Every option below is itemised on your written quote instead, with the actual quantity your kitchen needs (six metres of upstand, one rebated hob cut-out, four softened corners), so you can see what each decision costs and take one out if you would rather spend the money on a better slab.
Most of these are decided at template stage, when we are standing in the kitchen and can see how the light falls and where you will actually be standing. If you are not sure yet, that is normal, and it is not a reason to delay getting a quote.
Jump to
Other groups
- Edge profiles11
- Sink cut-outs3
- Draining grooves7
- Hob cut-outs3
- Splashbacks & upstands2
- End panels & waterfalls2
- Extra cut-outs9
- Window cills2
Sinks and hobs must be on site before we template, and a Belfast sink must be installed and level. The stone is cut to the appliance that is actually there.
6 options
External corners, the ones that stick out into the room, are the ones to think about. A square corner is the sharpest look and the most vulnerable: it chips if a pan swings into it and it hurts if you walk into it. Softening or rounding it costs almost nothing and removes both problems.
The size of the radius is a design decision. A small radius reads as a square corner that has simply been made safe. A large radius is a deliberate curve and changes how a peninsula feels to walk around, genuinely useful in a tight galley where you are squeezing past.
Internal corners, where two runs meet, are radiused as standard for the same reason we radius sink cut-outs: a sharp internal angle in stone is a stress point.
Double Round Corner
Quote option
Internal Corner
Quote option
Large Corner
Quote option
Normal Corner
Quote option
Small Corner
Quote option
Softened Corner
Quote option
Next step
Tell us the kitchen and we will itemise every one of these
Edges, cut-outs, upstands and corners all listed separately with quantities, so you can see what each choice adds before you agree to it. Fitted 3–7 working days from template.
Not sure which edge or cut-out you want? You do not need to be. We go through it at template stage, in the kitchen, with the slab chosen.