Edges & finishes
End panels & waterfalls
Taking the stone down the side of an island to the floor, instead of stopping it at the worktop.
Before you choose
These are options, not products
You cannot add an edge profile to a basket, and we would not want you to. What each of these costs depends on how many metres of it your kitchen needs, and on the slab it is being cut from.
So there are no prices on this page. Every option below is itemised on your written quote instead, with the actual quantity your kitchen needs (six metres of upstand, one rebated hob cut-out, four softened corners), so you can see what each decision costs and take one out if you would rather spend the money on a better slab.
Most of these are decided at template stage, when we are standing in the kitchen and can see how the light falls and where you will actually be standing. If you are not sure yet, that is normal, and it is not a reason to delay getting a quote.
Jump to
Other groups
- Edge profiles11
- Sink cut-outs3
- Draining grooves7
- Hob cut-outs3
- Splashbacks & upstands2
- Corners6
- Extra cut-outs9
- Window cills2
Sinks and hobs must be on site before we template, and a Belfast sink must be installed and level. The stone is cut to the appliance that is actually there.
2 options
A waterfall end runs the material vertically down the end of an island or a run of units. It is the single most effective way to make an island look like a piece of furniture rather than a row of cupboards, and on a strongly patterned slab it is where the material earns its money.
The mitred version joins the horizontal and vertical pieces at 45 degrees so there is no visible edge at the corner and, if the fabrication is done properly, the veining continues down the side without interruption. The set-back version butts the vertical panel underneath the worktop, which is simpler, cheaper, and leaves a visible line.
If the slab has strong movement, take the mitre. If it is a plain colour, the set-back detail is honest value and almost nobody will notice.
Waterfall Mitred
Quote option
Waterfall Set Back
Quote option
Next step
Tell us the kitchen and we will itemise every one of these
Edges, cut-outs, upstands and corners all listed separately with quantities, so you can see what each choice adds before you agree to it. Fitted 3–7 working days from template.
Not sure which edge or cut-out you want? You do not need to be. We go through it at template stage, in the kitchen, with the slab chosen.