Reception counters and desks in Alibon

Yes. Alibon is on the patch, and the postcodes we work here are RM10. It is worked on our east London run, along with the rest of Barking and Dagenham. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A commercial frontage rarely has anywhere to stop, so the unload is timed rather than assumed and the counter pieces come off first. One space, one visit, and the counter goes in whole. Both visits happen in your kitchen, the template and the fit, so there is nothing to visit and nothing to collect.

Deck access means a long open walkway from the lift or the stair to the front door, and that walk happens with the piece on edge in whatever weather there is. Estates of this kind carry the buildings that serve them, and every one has a counter the public queues at: a housing office, a health centre, a community hall, a library. Housing office counters get cleaned harder than they get used. Where the boxing stands proud of the finished wall the upstand behind it has to be broken into separate lengths, because one piece cannot pass it. A counter is worse off than a kitchen here, because it usually stands clear of the wall and has nothing behind it to hide a gap. The counter is scribed to the carcass, and the carcass to the floor.

Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. A counter top is one long piece with no run of cabinets to break it, so the route decides the join count before the sightlines get a vote. The counter waits on the van until there is somewhere to stand it. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Loading bays belonging to the building are booked by whoever holds the lease, and that is seldom whoever ordered the counter. Where the goods entrance is round the back, the carry is priced from there.

Honestly, no, though it would be easy to claim otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That says something about the housing round here, not about the work. Quote, cut and fit are the same here as on any other part of the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Counters are nearly always one-offs, so the saving that comes from repeating a specification is not usually on the table here. The joiner has to finish before we are able to start. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Where an operator is fitting out several receptions, the counters come off one slab run so the desks read as a set rather than as neighbours. Reception work is booked around the building staying open.

One leg of an L is nearly always the working run and the other little more than a landing space, but both are templated, cut and edged to the same standard. A counter has the same argument in miniature: a straight run nests kindly on a slab, and every return costs yield. A back-of-counter return is a separate piece with its own edges. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. What a counter is scribed to is the joiner's carcass rather than the plaster, which is why it is templated after the carcass is fixed and never before. A counter standing proud of the wall has nothing to hide behind. Tell us the hours the building can be worked in and whether the lobby stays open, and send photographs of every corner so we can find the ducts before we draw. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. The same split runs through commercial property: a landlord fitting out a shell and a tenant fitting out their own reception want different things from one counter. A desk in a re-let space is specified for the next occupier too.

Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. Units have to be fixed down as well as levelled. A loose carcass moves under stone. Packing takes up small variation. It is not there to hide something that belongs in the units. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. A lobby wall that leans shows itself along the back return, so that edge is cut to the line the wall actually takes. The carcass is levelled before the top is ever offered up.

Nothing is payable until the template, and the template measures the room as it stands rather than estimating from a plan. Every run, cut-out, edge, join and groove set is a line, which is what makes it comparable with anyone else’s. Cut-outs, edge profile and join count are itemised, so taking one out removes a line rather than starting an argument. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. Where the floor falls away across a lobby the carcass is packed level first, because the top cannot correct anything sitting under it. A shelf over a knee recess cannot be packed, so it is cut true.

Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Marble is the one people underestimate. It is porous, like granite, and wants sealing. Granite is porous to varying degrees, so it is sealed when we fit it and topped up over the life of the worktop. A maisonette puts the kitchen on one of two levels, so an internal staircase may be part of the route as well as the communal one. These are the counters where the lower transaction shelf earns its keep, because the people served at it are the people the standard was written for, so the knee space and the clear approach to it are checked on site rather than taken off a drawing. A converted house wants a counter that reads as furniture.

If the sink or hob changes after the template, the drawing changes first and nothing is cut meanwhile. A boiling tap needs a hole of its own and a cupboard below for the tank, so the units change too. Two bowls means two cut-outs and a bridge of stone between them, which decides where the sink can go. Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. The return between the high counter and the low shelf never nests neatly, and it is what decides how much slab the desk swallows. Every change of plane is a join waiting to be placed well.