Worktop installation in Barbican

Yes. Barbican is on the patch, and the postcodes we work here are EC2Y. It is worked on our the City run, along with the rest of the Square Mile. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Post-war terraces have a short straight hall to the kitchen, which is a good deal kinder than the houses they replaced. Rear or shared-path access is often the only way to bring a long piece in without turning it in the hall. The slow parts are slow for a reason. Do a full dry run of the route from car park lift to flat door before ordering, because the Barbican's walk-in is longer and more awkward than any staircase in the City.

There is no vehicle access to the podium at all - you park in one of the estate car parks below, then use a car park lift and walk the highwalks and internal corridors, which can be several hundred metres with multiple fire doors and level changes. Lift cars in the residential cores are small with low ceilings, so anything over about 2.2m has to be assessed against the specific core before you cut. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. Rushing that is what leaves a gap you look at every morning for fifteen years. It is the slow part of the day and it should be. Unlock any rear or shared path gate and clear both the hall and the back approach so we can choose the better route on the day. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.