Bathroom worktops and vanity tops in Greenford Green

Yes. Greenford Green is on the patch, and the postcodes we work here are UB6. It is worked on our west London run, along with the rest of Ealing. A drive behind an electric gate depends on somebody being in to open it and on the gate staying open while the load comes off. A vanity fit is a short visit with one or two pieces in it, so the van stands only for as long as it takes to walk them in. Tap holes are drilled at the works, so nothing keeps the van waiting. Both visits happen in your kitchen, the template and the fit, so there is nothing to visit and nothing to collect.

The under-stair cupboard opens off the kitchen in most of them, and its door swing is the reason a corner run stops where it does. Half-tiled walls are the norm, and the tile line is what the splash return has to meet, which is a decision taken before machining rather than discovered afterwards. A large bathroom is where a double vanity becomes possible. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Bathrooms carry the same problems in a smaller room, and a smaller room leaves a vanity nowhere to absorb them. The top follows the unit, and the unit follows a level.

The tail lift is still the pinch point, because the piece has to be walked off it onto the trolley while it is sitting at chest height. A vanity is the one piece of stone that route will not usually defeat, because a top cut to a standard unit depth weighs what one person can manage. Loft en-suites arrive up the tightest flight in the house. Some drives are wide enough for the van and too short for the tail lift, because the tail lift needs its own clear metre behind the vehicle. A bathroom booked on its own rarely fills a day, so it can be put into whichever part of the day the street is easiest. The basin travels in the van with the top it belongs to.

Not particularly. It would be easy to say yes and leave it there. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop installation. That is about what people have here rather than how it gets done. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Extension budgets are usually well spent by the time the worktop is ordered, which is where the choice between quartz and a thinner sintered stone actually gets made. Work of that kind brings en-suites with it, and an en-suite vanity is a smaller piece again carrying exactly the same four operations. Loft rooms bring an en-suite and a very tight flight. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where several bathrooms are done in one building the tops come off one slab run, because two greys from two batches sit badly on adjoining floors. A repeated top is still drilled to the taps actually bought.

Where the aisle is too tight the usual answer is a reduced-depth top on one side, and a 500mm run is a different cut, a different sink and a different drainer to a 600mm one. That shape decides what is left on the slab when the kitchen has been cut, and what is left on the slab is where most vanity tops come from. What the kitchen cannot use, the vanity usually can. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. A vanity has no depth to lose, so where a kitchen run would take a ten millimetre scribe without noticing, a shallow top cannot spare it. A shelf in a shower niche is scribed on three sides. Settle the tiling height and the basin model first, and let us know whether the unit is standing on the floor or hanging off the wall. Because the money comes out of a household rather than a maintenance budget, phasing is common: tops now, island or splashbacks later, quoted so the second visit still matches the first. Who is paying decides the material here more than anywhere else, because a vanity is small enough that an expensive stone stops being an expensive decision. The basin model is confirmed by whoever ordered it.

Packing takes up small variation. It is not there to hide something that belongs in the units. Stone does not flex, so a run that rocks on its carcasses rocks just as badly once it is stone. Levelling belongs in the carcasses, on their own legs and packers. A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. A wall-hung unit puts the whole weight into the wall rather than onto the floor, so what the wall is built of stops being a detail. A vanity has no depth to give away to a scribe.

The workmanship guarantee runs 5 years on every kitchen we fit. A remade piece is cut from the same slab run wherever the slab allows, because a replacement from another batch will not match across a join. The rest of the kitchen still goes in. One damaged piece does not hold up the pieces either side. Suction lifters need a clean dry face to hold, so in the wet the pads come off and the piece goes back to being carried on webbing by hand. The exception is a double vanity, which is a kitchen length in bathroom width and behaves like a worktop from the tail lift onwards. The piece is carried by its long edges, never by the aperture.

A join forced by the route still sits over a gable, so it is no poorer a join for that. Doorways, the newel post and the handrail usually take the room away, rather than the stairs themselves. Where there is a lift, whether it can be booked out and padded matters as much as its size. A loading bay or a red route puts a clock on the unload, so the pieces come off in the order they will be fitted rather than the order they were loaded. What the route really decides for a bathroom is the shelving and the window board, since long thin pieces are the ones that break when they are twisted round a turn. A cloakroom under the stairs is a short carry into a tight room.

A groove set is its own item on the quote rather than something rolled in with the sink cut-out. Grooves are machined in the workshop at the same time as the bowl cut-out, because they cannot be done well in a kitchen. Where there is no room for a separate drainer, grooves are usually what gets specified instead. Crittall windows were swapped for plastic ones in openings that were made good rather than rebuilt, which leaves reveals that are neither straight nor equal. What that does to a vanity is push the whole job into a narrow depth, because a bathroom takes the same stone as a kitchen in about two thirds of the width. Most vanity tops begin life as an offcut from another room.